Centrale FEU & GAZ à 8 voies en coffret mural 110/230 VAC
The CM-80T5N-B is a programmable control unit designed to operate with up to 136 4-20 mA gas detectors and to manage up to 16 input/output modules. It is supplied in a wall-mounted enclosure and powered at 230 VAC (mains). It offers straightforward programming via push buttons or the ProgSIM2 software, together with an alphanumeric display, allowing alarm and pre-alarm set points to be defined for each detector. Front-panel LEDs and a buzzer summarise the status of the system (alarm and fault). The high-level graphical software simplifies the set-up and commissioning of the CM-80T5N-B. An extensive library of configurations makes it easy to get started. Custom messages can be configured. It is certified ATEX II 1 G (zones 0, 1 and 2) and SIL2 for applications where operational safety is paramount.
Applications
Industries agroalimentaires
Industries chimiques
Waste treatment
Industries métallurgiques
Industries pharmaceutiques
The CM-80T5N-B is a programmable control unit designed to operate with up to 136 4-20 mA gas detectors and to manage up to 16 input/output modules. It is supplied in a wall-mounted enclosure and powered at 230 VAC (mains). It offers straightforward programming via push buttons or the ProgSIM2 software, together with an alphanumeric display, allowing alarm and pre-alarm set points to be defined for each detector. Front-panel LEDs and a buzzer summarise the status of the system (alarm and fault). The high-level graphical software simplifies the set-up and commissioning of the CM-80T5N-B. An extensive library of configurations makes it easy to get started. Custom messages can be configured. It is certified ATEX II 1 G (zones 0, 1 and 2) and SIL2 for applications where operational safety is paramount.
| Mechanical | |
Dimensions (L x H x P) |
370 x 300 x 118 mm |
Poids (hors batteries) |
2,5 kg |
Couleur |
Gris RAL 7035 |
Matériau |
ABS |
Fixation |
Murale |
| Electrical | |
Tension d’alimentation |
110 VAC or 230 VAC @ 50 Hz |
Consommation |
1,2 W max. |
Sorties relais |
2 relais 800 mA / 60 V |
Sorties surveillées |
2 monitored loops |
Entrées analogiques |
8 entrées 4-20 mA (0-21,5 mA) |
Entrées digitales |
2 entrées opto-isolées |
| Environnementales | |
Protection rating |
IP31 |
Température en fonctionnement / stockage |
0°C to +55°C / -20°C to +70°C |
Humidité en fonctionnement / stockage |
≤ 90% HR / ≤ 90% HR |
Gamme DUST |
GAS DETECTORS |
DUST-AD, DUST-DY |
Gamme TMP2 |
TEMPERATURE PROBES |
TMP2-D-A2-R-1-A |
Gamme REM-485 |
MODULES OPTIONNELS |
REM-485-T0, REM-485-T0-B |
Note : |
The CM-20 control panel is programmed using push buttons or the ProgSIM2 software. |
Module 12 relais
REM-485-T0
Module 8 sorties 1A + 4 relais
REM-485-T1
Module 8 entrées analogiques 4-20 mA
REM-485-T2
Interconnection board for open collector or open emitter outputs REM-D15
Interconnection board for 4-20 mA inputs
REM-D25
